Go 1577 ========= FREEZER TRAWLER BLT 1996, GERMANY CLASS DNV-GL 1A1 STERN TRAWLER E0 ICE (1B) RM (-30oC/+15Oc SEA) DWT 401 LOA 40.8M LBP 34.8M BEAM 11M M/E 1 X MAN B& W, 2610BHP SPEED ABT 12KN NOZZLE-MOUNTED PROPELLER, BP 16T @ 5KN 426CBM IN FREEZING HOLD (-28 DEGREES CELCIUS) ACCOMMODATION FOR 19 PERSONS FREEZING CAP ABT 32T/DAY (AMMONIA REFRIGERANT) CO2 FIREFIGHTING EQUIPMENT IN ENGINE ROOM LOCATION VANCOUVER BC CANADA... read more

Designer: West coaster International. Hull Construction: Fiber Reinforced Plastic. Crew: 4. Main Engine: Doosan V180TI1. Max Speed: 22 knots. Cruising Speed: 15 knots. Fish Hold: 2. Survey Frequency: Medium. Class: 3B.... read more

1997 17.37m x 5.11m Steel Overnight Fishing Charter Boat $390,000 CDN Gross tonnage: 62 tons Net tonnage: 47 tons Builder: Wray Brown Accommodations for 12 persons Engine: 197 Volva Penta TAMD 71-B Diesel - 218 hp Engine is heat exchanger cooled Transmission: Twin Disc MG507-1, 2.99:1 ratio Shaft: 2.5" Estimated speed: 10 knots Fuel Capacity: Total 440 gal Electronics: Icom VHF, Motorola VHF, Raytheon Radar, Garmin GPS, Garmin GPS Map Plotter, Garmin GPS Map Plotter Colour/Sounder, Raytheon Fish Finder, Ritchie Compass Davit: For heavy lifting from dock to upper... read more

LOA 33,88 m Beam 11,5 m Draft 2,2 m Built in year 2021 Flag : Norway Gross Tonnage of 393 and Nett Tonnage of 117 Engines : 1 x Scania / Scania AB DI13 074M, 426 kw, 1.800 rpm, Propellers 1 x Center 1 Deck... read more

Three used commercial fishing vessels are up for sale. The vessels are mainly used for bottom trawling and are fully equipped with fishing equipment including trawl nets, fishing gear, and water doors. The boats are in good shape and can be put in service directly. Also, they are fully equipped with navigational equipment and extra devices (Radar, GPS, Fish Funder, Tracking and Steering system,, etc.) which allow the boats to be operated in various context. All vessels are designed with a large hold capacity, yet still maintain spacious engine room and accommodation areas. Every vessel has the... read more

On instructions from the Federal Court of Australia, Melbourne, this vessel is now offered for sale by Public Tender. The closing time and date for receiving offers is 17:00 AEDT (Melbourne local time) on 28 February 2024. 34m Factory Freezer Stern Trawler built by Construcciones Navales Santodomigo in Vigo, Spain and delivered in 1979. Powered by a single MAN B& W 7T 23LU driving a Berg controllable pitch propeller housed in a Korts nozzle. The accommodation block is set forward of amidships, with the wheelhouse set above the accommodation block. The accommodation is on two decks wit... read more

This is offered as a kitset for any builder and we can also arrange a builder in a few locations. A modern Hi-tech rising boat! Fuel:4 x 10,000L. Brine/ Bait tanks: 4 x 7000L. Loaded Displacement: 115 tonnes. Accommodation for 12 crew, NSCV class 3B. Power: 2x 650hp. Freezer.... read more

LOA 30,6 m Beam 7,5 m Draft 4,26 m Built in year 1995 Flag : Chile Gross Tonnage of 255 and Nett Tonnage of 80 Deadweight : 210 metric tonnes Total 5 berths Speed : 10 knots Engines : 1 x Caterpillar / Caterpillar Inc 3412TA, 530 kw, 1.800 rpm, Propellers 1 Fixed Pitch (Center) 1 Deck... read more

Former trawler, perfect vessel for whale/seal watching. Currently in use as an offshore sportfishing vessel on the Swedish West Coast. in 2013, new engine parts, sanitized for asbestos. Crew area with 6 berths, mess with small kitchen/kiosk and a saloon with about 30 seats. Well equipped wheelhouse with navigation table and a small bunk for the skipper. Navigational Unit: Furuno Navnet VX2 2010 Radar, AIS, Charts Computers: Dell Petium with SSD + Philips 22" screen Chart program: Transas Navigator Radar: Furuno NAVnet Autopilot: Robertson AP45 GPS navigator: Furuno GP-150 2013 ... read more

71’ x 18.5 x 6’ Steel Commercial Fishing Vessel Price: $65,000 CDN • Powered by Volvo 120A ( 270 to 290 hp) • Capital Gear 3.88:1 ratio • 44” x 40” 4 blade RH propeller • 3 ½” shaft • V-bottom • Keel cooled • New superstructure • New Wiring • 36’ open space behind wheelhouse • Lots of headroom • Great Ice breaking capabilities • Furuno Radar • Furuno Depth Sounder • Silex GPS/Plotter • 24volt and 32 volt starting system • Two Lister diesel engines – ... read more

14m Alloy Cray Boat built to order. Designed for 13 - 30 Pax. Single 750hp Scania for loaded speed 22+ knots. V berth, Dinette, Underdeck storage and toilet. This is offered as a kitset for any builder and we can also arrange a builder in a few locations.... read more

Carvel Construction, Kauri The boat is setup for trawling and has a 70ft scraper trawl net on a net roller set off a hydraulic winch with 200 fathom of wire on trawl drums. Hull Material: Timber. Year Built: 1972. Vessel Builder and Designer: Ken Turner. Total Engine Power: 90kw. Drive Type: Shaft. Maximum Cargo Load: 1.5 Tonnes.... read more

LOA 21,5 m Beam 6,4 m Draft 2 m Built in year 2001 Flag : Iceland Gross Tonnage of 193 and Nett Tonnage of 58 Deadweight : 61 metric tonnes Ice strength Speed : 11,3 knots Engines : 1 x Cummins / Cummins Engine Co Inc KTA-19-M3, 440 kw, 1.800 rpm, Propellers 1 Controllable Pitch (Center)... read more

These new build vessels are custom built for various fishing applications including bottom trawling, purse seining, long lining, mining, squid fishing and research, and many vessels are custom built to satisfy the customer’s every need. Vessels are designed with a large hold capacity, yet still maintain spacious engine room and accommodation areas. Many of the vessels are built to include more than one application to allow for products to be processed at sea. The material is also so versatile that a range of sizes are available from 33 feet to 100 feet based on existing moulds. This v... read more

Builder and Place / Year Built: K.K. Murahami Zosensho / Japan / 1985. Type of Service: Catcher / Large Scale Fishing Vessel. Hull Material: Steel. Marine Diesel Engine: Akasaka. Date of Last Safety Inspection: April 30, 2018. Remaining Economic Life: 20 years.... read more

A former survey vessel, this steel workboat may look like you'd expect from outboard however, when you step into the newly rebuilt wheelhouse you realise just how much has been done to increase her versatility. The hull has been epoxy primed and painted and a bowthruster added to improve manoeuvrability. What was once a traditional fishing boat style short wheelhouse has been completely rebuilt and extended to provide a comfortable seating area (which converts to a double berth), galley and heads/shower area. Forward there is a pod style cabin creating additional berths and seating. ... read more